Up To 100% Savings
New from the ground up, Bern's FL-1 takes the traditional Bern DNA and applies it to a fully-vented, super lightweight, In-Mold design. Boa adjustability provides a wide-range of fit and excellent comfort, while 18 ultra-large vents keep you cool. Available with and without MIPS, the FL-1 appeals to high-end commuters, road riders, and mountain bikers alike. The premium in-mold construction features a poly-carbonate micro-shell lined with EPS foam to create an ultra-lightweight helmet. The FL-1 Boa system is a proprietary, lightweight and breathable 360-degree adjustable fit system responsible for near perfect fit, amplifying the FL-1s safety measure and incredible comfort. MIPS changes the way we think about helmet safety. MIPS was developed by brain surgeons and scientists to reduce rotational forces on the brain caused by angled impacts to the head.
Velcro patches for the iXS Trail RS helmet.
Lose your kid's Baby Nutty Helmet pads? Or did they just get a little too much loving? Replacement pad sets for your Baby Nutty helmet. Each set comes with two of: - 3mm pads (front and rear) - 6mm pads (front and rear) - 6mm crown pad
Replacement dial adjuster unit for iXS helmets
Replacement Chin Buckle for Trail RS Helmet
Replace the worn out or broken chin bucket on your iXS Trail RS helmet with this replacement buckle. It's easy to install so you'll be back out on the trail in no time.
Replace the original visor bolts on your iXS Trail RS helmet with this bolt set.
- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror
No two heads are exactly the same. Give your Nutcase Gen3 Street helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm, and 9mm thicknesses. Crown pad is 3mm thick. Please note: This pad set is meant as a replacement for worn out pads, and does not need to be purchased with new helmets. All Gen3 Small & Medium helmets come with one set of 3mm & one set of 6mm pads; Large comes with those two sets and the additional 9mm back pad.
To protect against bright sunlight and light rain, the Nutcase removable visor shades, shields and protects. Made from soft flexible rubber with a hard rubber fin that fits between the ABS plastic outer shell and EPS foam liner, the visor is perfect for unpredictable weather and sunny days alike. Visors are compatible with Street and Little Nutty helmets only, and will not fit with Metroride, Baby Nutty, Moto, Snow, or Water.
No two heads are exactly the same. Give your Nutcase Metroride helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm and 9mm thicknesses.
$9.95 - $12.95
Easily replace the original visor on your iXS Trail RS helmet with this visor. Just bolt it on.
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Complete headring replacement for iXS helmets
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g
The Jandd Helmet Cover offers protection from the elements. - 3M Reflective Tape is sewn to the front and back, additionally the back has a loop for a high-visibility flashing light - Made with 200 Nylon Oxford with a laminated urethane layer, heat sealed seams and sew holes - Fits most bike helmets and keeps water from penetrating - NOTE: One size does not fit all, this cover is intended for standard helmets without a visor
EPR Cheek Pad Replacement Set for Xact Helmet
Freshen up your iXS Xact helmet with this replacement liner.
Replacement visor and pins for the iXS Xact helmet.
Replacement visor and pins for the iXS Xult helmet.
Replacement pads for Kask's Rapido helmet.
The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.
Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light. Features - Dimensions: 70.5 x 28.5 x 23 mm - Weight: 51.5 g (with bracket and batteries) - Light source: White LED x1, Red LED x1 - Battery: AAA alkaline battery x2 - Mount: Rubber band (Long) Modes/Run Time - (Front) Constant mode (15 lumens): 100hrs - (Rear) Constant mode (10 lumens): 100hrs - (Front) Flashing mode (30 lumens): 100hrs - (Rear) Flashing mode (10 lumens): 100hrs
$30.00 - $49.99
Start 'em early! Designed for groms 5 years old and up, the CHAKRA Child helmet features Composite Fusion in-mold construction, and extended rear coverage for added safety and protection. A visor molded directly into the shell and a Dial-Fit closure system will give any grom the confidence and motivation to get out and ride! Technology: - Composite Fusion: In-molding technology, merging the shell and EPS foam liner. Better impact energy management, increased dynamic range - smaller, lighter and stronger. Features: - Anti-microbial pads - Polycarbonate shell - EPS foam - One size fits most (48-54 CM)
$30.00 - $35.00
Wrap your noggin in slick-styled comfort with Kali's Maha Helmet. It's got an ABS shell for rugged durability, and underneath, the expanded polystyrene materials ensure sturdiness and reliability. It all snugs up comfortably thanks to the adjustable, anti-microbial fit pads that you can pull out for washing to keep the funk at bay. And, with Kali's notoriously awesome graphics, you look as great as the Maha feels.
- Protextura Plus fabric for water-proof protection while maintaining high breathability - Designed to fit most helmets - Reflective trim and bright yellow color enhances visibility in low light or foggy conditions - Drawcord in the hem helps fit a wide variety of helmet shapes
Built just for rough-and-tumble pre-teens, Bern's Diabla combines cute colors and graphics with skateboard styling and a secure fit. And, since the Diabla passes all bike and snow safety certifications, it can go from the skate park, to the bike path, to the local ski hill with ease. Built using Bern's lightweight EPS/ABS construction and featuring their simple and secure Team Fit single sizing, the Diabla fits and feels as good as it looks.
With its classic skate design and cool colors, Bern's Diablo is the helmet for kids who hate to wear helmets. Featuring the same premium construction, fit, and finish as the adult Team Macon, the Diablo is scaled down to fit pre-teen heads perfectly. Bern's Team Fit single-sizing construction keeps things simple and secure, while their lightweight EPS/ABS design is safe and durable. The Diablo also passes all snow and bike safety certifications, meaning one helmet for all four seasons.
Cannondale's Burgerman kids helmet combines protection, ventilation, and Jon Burgerman's fun designs for a helmet your little ones won't take off. Sizing - X-Small: 48-54cm - Small: 52-57cm Features - Weight: 240g (Small)- - Multiple vents, including some with bug screens - In fusion mold technology - Easy fit system - Soft-touch webbing and pinch guard buckle
Page 1 of 8 Next page