Lighting

For seeing the road and staying safe, CatEye's EL135/Omni 3 Light Kit includes their fine EL135 headlight and Omni 3 taillight. To light the way, the compact headlight with its no-tools universal quick-release handlebar mount boasts 3 super-bright LEDs, constant and flashing modes, and CatEye's OptiCube lens technology for a wider, 150-candlepower beam with excellent visibility. Meanwhile, for the back, CatEye's Omni 3 with their FlexTight mount and included clothing clip can be placed almost anywhere and it uses their Omni Directional Technology for 360 degrees of visibility and boasts 3 ultra-bright LEDs plus constant, flashing and rapid modes.

Modern lighting technology meets vintage style in Sunlite's Low Rider LED Bullet. The bullet shape hearkens back to the era of generator-powered headlights, but this modern torch features three LED lights to brighten your way through nighttime streets. It runs on two C-cell batteries (sold separately) for hours of use, and the two modes let you choose between a steady beam and a flashing beam. This light mounts easily on your fork or under your headset spacers to shed light on all your night time rides.

• 2 x 0.5 watt super bright red LEDs • 3 modes (1 steady 2 flashing) • Multifit bracket (25-32mm)

- 24 lumen LED - Built-in Li-Ion USB rechargeable battery - 1.5 ~ 6 hour run time per charge - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

- USB rechargeable super bright COB style LED light - 8 modes - 4 brightness levels each of both steady and flash - Charging and low battery indicator - Single button interface - quick press to change mode, long press to turn off and double tap to change mode, long press to turn off and double tap to change from steady to flashing - 3 hour charge time - Lumens: 100 - Mount: Rubber strap

- Single LED 115 lumen light - Water resistant aluminum casing - Multi-fit QR mounting bracket - 3 AAA batteries provide power for up to 18 hours - 3 modes including 2 solid, and one flashing setting

Headlight • 3 watt LED headlight • 2 modes (1 steady; 1 flashing) • Aluminum casing • Uses 4 AAA batteries (included) Taillight • 2 x 0.5 watt super bright LEDs • 3 modes (1 steady; 2 flashing) • Multi-fit QR seat post mount • Uses 2 AAA batteries (included) • Water resistant

- USB rechargeable 3 lumen safety light - 4 modes including 1 solid and 3 flashing settings - Multi-fit rubber strap attachment - Charging cable included

- Single super bright LED safety light combo set - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes per light - Steady and flash

Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.

- 1.5 watt, 100-lumen USB-rechargeable headlight - 4 steady modes and 2 flash settings - Low-battery indicator

Be seen with Sunlite's HL-L380/TL-L340 Combo. The front sports three bright Nichia LEDs, steady and flashing modes, and a 200-hour run time! A quick-release handlebar mount is included, too. What's more, the taillight has three LEDs, steady and flashing modes, and a quick-release mounting bracket.

The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights

Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet. - Compatible with: Urban, Vis, Solite, Taz, GoBe

This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).

The Pro 2200 boasts one of the category's best power-to-weight ratios. With 2200 lumens of light output, using 3 CREE LEDs- set into a NiteRider custom reflector, guarantees to set the darkest bike trail ablaze. It features an accurate eight-step fuel gauge, keeping the rider informed of battery levels at all times. These attributes make the Pro 2200 the "go to" light among the world's top athletes and enthusiasts alike. - Compact and lightweight, perfect for race inspired riders - Custom 3 cone reflector producing brilliant trail illumination - 3 – class leading CREE LEDs at 6000k - Rugged design with Dupont Fiberglass reinforced nylon housings - Handlebar mount fits up to 35mm diameter bars - Helmet mountable - Lightweight 4 cell Li-Ion battery - Easily check battery power levels with the 8 step fuel gauge - FL 1 Standard IP64, dust and water-resistant - Convenient nylon storage pouch WARRANTY The Pro 2200 Race is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Li-Ion Battery - Helmet Mount - Handlebar Mount – Fits up to 35mm - 36" Extension Cable - AC Adapter - Nylon Storage Pouch

The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 500 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 500 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

- Detects when you are braking to emit a bright light alerting others you're stopping - Max 150 lumens / 57 hour runtime in Flash mode - New 800 mAh battery. Larger battery, longer runtimes - New mounting style to fit shorter seat posts with USB plug and cable - Wide-angle optics with 270 visibility for maximum safety - Aero seat post compatible - Lightweight and durable - IPX7 water resistant co-molded design

The Planet Bike Current 500 front white head light is designed to illuminate the path ahead whenever you hop on your electric bike. Whether you’re upgrading the light that came spec’d on your E-bike or adding a front light, the Current 500 is a great choice. The OSRAM LED delivers 500 lumens and the precision fish eye Clean Beam lensing creates a horizontal cut-off beam that won’t blind oncoming cyclists and path users. The sleek, rugged and compact form is constructed of aluminum alloy and mounts neatly to your bike’s fork crown. The mounting bracket’s dual pivot points let you fine tune the beam to ideally project light for a safe ride day or night. The Current 500 includes a Bosch system plug for clean installation into the front light outlet on your Bosch-powered E-bike. Don’t worry if you ride an electric bike powered by Shimano, Toshiba, Stromer and other motor systems because the Current power cable can be modified to work with most systems. Great optics, abundant lumen output and clean design make Planet Bike's Current 500 a smart choice for E-bike cyclists. Be safer and brighter on the path without blinding your fellow riders! PRECISION BEAM Osram High output LED provides steady 500 lumens with clean beam cutoff lens PLUGS INTO BOSCH DC 6-15V BATTERY Easily plugs into Bosch batteries. Can be modified to fit Toshiba and Shimano batteries. MULTI PIVOT INSTALLATION Get the light where you want it with two pivot point bracket - OSRAM KW H2L531.TE LED provides a 500 lumen high power beam - FL1 Tested - Steady mode (500 lm) - Provides 240 degrees of visibility for daytime traffic and provides optimal lighting for nighttime riding - Clean Beam Design - Precision Clean Beam cut-off lens is designed with your fellow riders in mind. Provides for courteous, anti-glare illumination on the ground ahead of you and not into the eyes of oncoming riders. - Front Fork Crown Mounted - Securely mounts to your E- bike's fork crown with mounting bracket with two robust pivot points that allow for beam angle adjustability. - Water resistantance rated to IPX6 standard - Electric Bike Compatible - Includes a Bosch E-bike system plug for clean installation to Bosch-powered electric bikes. A certified mechanic is recommend for installation on other systems. - Compatible with any 6V-15V e-bike system - Cable length is 56" - 116 grams

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make/model/battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. Disclaimer: Direct X-Lock Mounting System Not compatible with all stems. Please see installation manual for stem compatibility. - 500 Lumens - Includes aluminum CNC fork and E-BIKE Stem mount - Enhanced Maximum Optical Reflection (MOR) lens - E-bike compatible 12 – 48V input - 130 cm power cable included - IPX7 water resistant - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98" Motor Compatibility - Bosch: 6V, 12V - Shimano: E5000, E7000, E6100, E6110, E9000, E8000, E8080, E6002, E6012 - Yamaha: PWse - BionX - Brose Drive S (2018) - Continental: 48V Prime, 48V Revolution

Safety first, the AMPP500 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. FEATURES: - High power rechargeable headlight (500 lm) - Powerful wide beam with OptiCube lens technology - Excellent side cut outs for enhanced side visibility - Large-capacity lithium-ion rechargeable battery - Battery indicator mode flashes red when less than 20% - Lightweight and compact polycarbonate body - USB rechargeable (Micro USB cable included) - Mode memory function - 4 light modes: High, Low, Daytime HyperConstant, Flashing - Secure FlexTight bracket for quick installation - Water resistant - Optional helmet mount, center fork bracket available Modes/Run time: - High mode: 500 lumens | 1.5hrs - Low mode: 250 lumens | 3.5hrs Dimensions/Weight: - 32 x 102 x 33 mm - Weight: 95 grams (light unit and battery) Light source: - High intensity white LED X1 Optional Parts: - Center Fork Bracket (5342440) - Helmet mount (5341831N) Recharge time: - Approximately 4-4.5hrs (USB2.0 recharge) - About 300 recharge times (until rated capacity drops to 70%)

Topeak's Tail Lux helmet light mounts to any helmet or Topeak bag or rack with ease. Its constant and blinking modes ensure you'll be seen. A nice supplement to your regular light set, the Tail Lux is a convenient way to add extra safety to your commute. Plus, the coin battery is included.

The Fusion Drive Pro 600+ Front is a budget-friendly, feature-packed cycling light designed to elevate your riding experience. It provides powerful and long-lasting illumination with a maximum output of 600 lumens and a runtime of up to 36 hours. This light offers six output modes, including highly disruptive Daytime Flash ensuring maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime. The CNC-machined aluminum construction with cooling fins guarantees durability and efficient heat dissipation, the fresh optical design enhances light dispersion, and the optional GoPro mount allows for versatile mounting options. With waterproof USB-C charging(cable not included), compatibility with the Infinite Light Power Pack+, and rigorous IPX7 waterproofing testing, this light is ready to accompany you on any adventure. - Max 600 lumens / 36-hour max runtime - Max 600 lumens / 36-hour max runtime - Waterproof USB-C charging port with charge indicator - Daytime Flash mode with Highly Disruptive Pattern - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - GoPro mount available separately - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity

AMPP200 200 lumen USB rechargeable light with excellent side visibility. A versatile rubber strap allows for quick and easy attachment/removal from the handlebar. - Compact rechargeable headlight (200 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Three light modes (High / Low / Flashing) - Turns on Flashing mode with double-click of power button Run time: - High mode 200 lumens:approx 1.5hrs - Low mode 40 lumens:approx 13hrs - Flashing mode 200 lumens:approx 30hrs ORM Rechargeable Look no further than the ORB rear light. It's compact, lightweight and neat. With varying flashing modes, the ORB Rechargeable helps you to be seen out on the road. - Lens functions as push-button - USB rechargeable - 3 modes *Charging time: 3.5h - Robust aluminum body - Versatile rubber strap mount Run time: - Rapid flashing :approx 5 hrs - Slow flashing :approx 5 hrs - Constant :approx 2.5 hrs

The AMPP800's compact and durable alloy body features a three level battery indicator that means there is always time to get home. - High power rechargeable headlight (800 lm) - Powerful wide beam with OptiCube lens technology - Excellent side visibility - Large capacity lithium-ion rechargeable battery - Built-in fast recharging circuit *Full charge in approx 3 hours (minimum) - 3-level battery indicator (Blue: Above 50% Yellow: 30-50% Red: Less than 30%) - USB rechargeable (Micro-USB cable included) - Mode memory function - Five light modes (High / Middle / Low / Daytime HyperConstant / Flashing) - Turns on High mode with double-click of power button - FlexTight bracket - Helmet mount and center fork bracket (optional) Run time: - High mode 800 lumens: 1.5hrs - Middle mode 400 lumens: 2hrs - Low mode 200 lumens: 4hrs - Daytime HyperConstant mode 800/200 lumens: 5hrs - Flashing mode 200 lumens: 30hrs ViZ 300—Pumping out an attention-grabbing 300 lumens with OptiCube lens technology, the versatile ViZ300 stands out with the power of Daytime Hyperflash mode and the friendliness of Group Ride mode. - 3 LEDs (300 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (30 lumens):5 hrs - Flashing (30 lumens):45 hrs - Group Ride (100 lumens):8 hrs - Daytime Hyperflash (300 lumens):10 hrs

3 LED e-bike light, the Flex is our e-mtb orientated light with a possible output of up to 3300 lumens in a lightweight and compact unit. Powered via the battery/motor system, this allows you to do away with the traditional onboard battery system. The Flex utilises our REFLEX ++ technology for smarter battery management, and is fitted with wired remote for easy mode changes. Fitment is from a new single sided reinforced nylon bracket, this allows for central mounting position on the bike.

This is the "Next Generation" of our compact and versatile fast-mounting bike lights. We powered them up with lithium polymer rechargeable batteries and gave them Steady, Superflash, and Courtesy modes. The flexible mounting system secures the lights to your helmet, bars, seat post, and a ton of other places to help keep you illuminated. - High-output, surface-mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested - headlight run times: 2.5 hrs (steady – 50 lm), 3.5 hrs (Courtesy - 14-45 lm), and up to 14 hrs (Superflash - 50 lm) - FL1 tested - tail light run times: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy - 1.5-4.5 lm), and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust and water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast-mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams

A universal quick release mount that attaches to round-shaped drop and flat handlebars.

- Replacement aero mount for Numen light

The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to a variety of handlebar shapes and sizes. Specs - Max Lumens: 500 - Weight: 84g - Max Runtime: 20 hours - Recharge Time: 2:30 hours

The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

Front Compact, durable cycling light with a machined aluminum body. It features built in cooling fins and cutouts for side visibility. Its single LED design provides up to an impressive 500 lumens of output and eight output modes—including a Daytime Flash mode. Run-time has increased by 2.5 hours for up to 20 hours. Charging is simple with an integrated cable-free USB stick. It securely straps to a variety of handlebar shapes and sizes. Rear Compact, super-lightweight USB rechargeable LED cycling taillight. Its durable co-molded construction is minimal and has an IPX7 water-resistance rating. A versatile mounting strap quickly mounts to a variety of post sizes. Five output modes offer up to 5-lumens and the custom Wide Angle Optics lens provides well over 180° of visibility. The Femto USB Rear can run for up to 15 hours and is easily rechargeable with the included Micro USB cable. A secure, threaded composite matrix cover keeps the USB port clean and sealed. The Femto USB is perfect for commuters and recreational riders looking for a simple and inexpensive way to add visibility. Specs - Max Lumens: 500 (front) / 5 (rear) - Weight: 84g (front) / 23g (rear) - Max Runtime: 20 hours (front) / 15 hours (rear) - Recharge Time: 2:30 hours (front) / 2:30 hours (rear)

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

The Macro Drive 1400+ throws out a powerful 1400 lumens of output through our Tri-Focus Optics, creating an optimized beam pattern for superior visibility on the trail or road. Its waterproof USB-C charging port and 2A+ fast charging capability allows for convenient recharging(cable not included), while the CNC-machined aluminum construction with cooling fins ensures durability and efficient heat dissipation. A GoPro mount option and compatibility with the Infinite Light Power Pack+, this front light offers versatile mounting choices and extended battery life. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Choose from seven different output modes, from the attention-grabbing Daytime Flash Mode to the whopping 300-hour runtime Femto Mode, to suit your lighting needs. A versatile and replaceable strap secures it to a variety of handlebar sizes. - Max 1,400 lumens / 300-hour runtime in Femto mode - Max 1,400 lumens / 300-hour runtime in Femto mode - Waterproof USB-C charging port with charge indicator - 2Amp fast charging - CNC-machined aluminum construction with cooling fins - Tri-Focus Optics are brighter with a large wide-angle pattern - Optional GoPro mount available separately - Infinite Light Power Pack+ Compatible for extended run times - IPX7 Waterproofing standards are Rigorously tested - 5200 mAh battery capacity

FRONT LIGHT: A compact cycling safety light built around three high-output LED emitters, the KTV Drive Pro 300+ Front light offers up to 300 lumens of output and a highly disruptive Daytime Flash mode. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. The KTV Drive Pro 300+ Front offers convenience and versatility with six output modes, up to an impressive 100-hour max runtime, and waterproof USB-C charging(cable not included). REAR LIGHT: The KTV Drive+ Rear is a compact yet powerful rear light that ensures optimal visibility and safety on your rides. With a maximum output of 40 lumens, an impressive 45-hour runtime in Femto mode, and six different output modes, including Daytime Flash, this rear light provides reliable illumination. The unique design is compatible with aero and round seatposts, ensuring versatility for various bike setups. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, and an integrated USB stick allows convenient cable-free recharging. Rigorously tested to IPX7 Waterproofing standards, it can withstand challenging weather conditions. Note: These lights are not being distributed within the German market. - Front Light Max 300 lumen blast mode / 100-hour runtime in Femto mode - Front Light Max 300 lumen blast mode / 100-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - Low-profile mounting with integrated strap hooks - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity - Rear Light Max 40 lumens / 45-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB-stick for cable-free recharging - 400 mAh battery capacity

The Grid 2'fer is a high-powered front and rear light. A quick double-click of the power button switches it from white to red. With four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid 2'fer offers the right light, front or rear, with plenty of rechargeable power to keep you visible any time of day. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL - 1 STANDARD-This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

A classic bike light with a modern twist, the Classic Drive XL 700+ front light puts out 700 lumens (up to 45 hours of runtime) via a single high-output LED emitter. It's built around a sleep cylindrical housing that offers a compact and lightweight form factor. Its waterproof USB-C with 2A+ fast charging capability is convenient for recharging(cable not included). The machined aluminum construction ensures durability and efficient heat dissipation. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Choose from 7 different output modes, from the highly disruptive Daytime Flash mode to the long-lasting 45-hour runtime in Femto Mode.. The Infinite Light Power Pack+ compatibility offers versatility and extends runtimes. - Max 700 lumens / 45-hour runtime in Femto mode - Max 700 lumens / 45-hour runtime in Femto mode - Classic Lezyne styling with modern technology - Machined aluminum construction - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2Amp fast charging - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 3300 mAh battery capacity

- Supercharged 1:30 to 110 hour run time. - Extremely powerful 2,000 lumens in the most compact and stylish form - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking. - Daytime visible flashes make you stand out on busy streets - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets. - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet

- ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILTY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option - .20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. - Low cost, high powered light - Highly visible in traffic = keeps you safe - 3 light settings – High, Low and flash - Tough durable design - Lumen Output: 250 - Run Time: 12:30 – 28:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Lezyne helmet mount for LED bike lights or GoPro action cameras. Follows line-of-sight for optimized night riding or recording. Constructed from durable, mold-injected Composite Matrix construction. Easy to install Velcro strap fits virtually all helmet styles. Compatible with a large number of Lezyne headlights via the GoPro LED Adapter. - Composite matrix helmet light mount with strap system - GoPro adapter

- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 20 hours for front and 10 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

- Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 15 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged

- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket

- Front Modes include High Steady, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 22.5 hours (Avenue F-100 COB) and 11.25 hours (Avenue R-50 COB) - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 15 hours for front and 7.5 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

The Rojo 100 USB rechargeable bike tail light is designed to keep you safe and visible on every ride, day and night. It’s packed with up to 100 lumens of power so you’ll be sure to be noticed on your daytime rides and commutes whether you’re on the road, bike path or turning the corner downtown. Four precision engineered lighting modes let you select the perfect optimized optical output. - 2 high output Cree XB-D LEDs provide four modes for every kind of ride (Steady, Pulse, Courtesy & Superflash Turbo settings) - See the light in action here! - Tested to FL1 standards - Run times: 5 hrs (Steady – 25 lm), 10 hrs (Pulse - 50-90 lm), 12 hrs (Courtesy - 30-90 lm) and up to 15 hrs (Superflash - Turbo - 100 lm) - Provide 270° of visibility - Designed for when you ride the most…during the daytime. The Rojo 100 is engineered to be highly visible even in bright, sunny conditions - Water resistant – Don’t be worried to ride in the rain, the Rojo 100 is dust & water resistance rated to the IP66 standard - Fast recharging - 650 mAh lithium polymer battery charges in 2.5 hours with micro USB type C cable (included) - Multiple mounting options - Includes rear rack, seat post, seat stay and clip mount flexible mounting options - 48 grams

The Blaze 600 SLX provides high lumen output, generous run times and 275° of visibility. The addition of amber side lights and Courtesy mode make it a bike path hero. - Cree XPL2 LED provides high, medium and low power beam along with Courtesy & Superflash modes - FL1 Tested – Run times: 1.8 hrs (high - 600 lm), 3.7 hrs (medium - 300 lm), 8 hrs (low - 150 lm), 20 hrs (Courtesy 150-250 lm) and up to 40 hrs (Superflash - 600 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP66 standard - Sanyo 2600 mAh lithium ion battery charges in 5 hours with micro USB cable (included) - Smart Charging Technology with built in low battery indicator - Quick Twist mount adjusts or removes without tools - Includes Lockout mode - 145 grams

X3 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - LED STRIP shows battery level - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 30 LUX - 5 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 4 hrs XR Rear Light: - Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs

When you absolutely, positively need to be seen, day or night, rain or shine, trust CatEye's brightest rear safety light. The ViZ450 features 5 LEDs, 300-degree visibility, OptiCube lens technology, and makes sure you stand out with the power of Daytime Hyperflash mode. - 5 LEDs (450 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3.5h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (40 lumens):5 hrs - Flashing (40 lumens):65 hrs - Group Ride (130 lumens):10 hrs - Daytime Hyperflash (450 lumens):14 hrs

AMPP400 Safety first, the AMPP 400 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. Viz 150—Safety first, the AMPP500 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. - Rechargeable headlight (400 lm) - Wide beam with OptiCube lens technology - Excellent side visibility - Low battery indicator (Illuminates in red with less than 20% battery remaining) - USB rechargeable (Micro-USB cable included) - Mode memory function - Four light modes (High / Low / Daytime HyperConstant / Flashing) - Turns on High mode with double-click of power button - FlexTight bracket - Improved release button has made it easy to remove the light unit from the bracket - Helmet mount and center fork bracket (optional) Run Times - High (400 lm): 2 hours - Low (200 lm): 4 hours - Daytime Hyper-Constant (400/200 lm): 6 hours - Flashing (200 lm): 60 hours ViZ150 Compact, bright, and versatile, the ViZ150 stands out with high visibility from OptiCube lens technology and Daytime Hyperflash mode in an economical package. Run Times - Constant (20 lm): 5 hours - Flashing (15 lm): 70 hours - Group Ride (50 lm): 11 hours - Daytime Hyperflash (150 lm): 15 hours

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series