Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Burley Ballz Thru Axle
$59.99
A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC
Burley Floor Mat
$49.99
Have fun, rinse, and repeat! The Burley Floor Mat catches all the dirt, sand, snacks, and mud for easy clean-up. - Easy removal for a quick clean-up
Burley Hitch Alt Adapter (3/8 x 26)
$17.99
Burley's Hitch Alt Adapters enable use of the standard Burley hitch on bicycles that have rear dropouts that don't allow normal installation of the hitch (the dropouts are the parts of the frame where the rear wheel is attached). This type of adapter is installed in place of the non-drive (left) side axle nut and once it's in place, the Burley hitch is installed to the adapter.
Burley Coho Pannier Rack
$59.99
The Coho Pannier Rack allows for the attachment of panniers to the fender of the Coho XC. The 10mm bar allows for use with many different types of panniers. Pair the Coho Pannier Rack with the Burley Pannier Set for even more carrying capacity on your Coho XC. - Specially designed for use with the Burley Coho XC - Easy installation - Compact form factor
Burley Pannier Set
$89.99
Two roll-top, waterproof panniers keep gear dry and organized. Compatible with all 10mm rack bars and have a combined capacity of 22 liters. Bright colors and reflective patches provide increased visibility. Constructed with 500D waterproof tarpaulin with heat-sealed seams. - Waterproof - Compatible with 10mm rack bars - Large reflective patches - Easy-to-use carry handle - Combined weight: 2.09 lbs.
Burley Steel Hitch
$24.99
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
Burley Travoy Rack Mount
$29.99
Burley's Travoy Rack Mount lets you connect your Travoy trailer to your bicycle rack rather than your seatpost (trailer, rack, and hitch sold separately).
Burley Nomad Cargo Rack
$89.99
Burley's Nomad Cargo Rack is made of lightweight, sturdy aluminum and mounts easily to your Nomad trailer (sold separately) so you can expand your carrying capacity and haul even more stuff on your journeys. Now there's no excuse to leave anything home!
Burley Travoy Hitch
$39.99
This Travoy hitch from Burley connects your Travoy trailer (sold separately) to your bicycle seatpost. Replace a lost hitch or get one for each bike in your quiver for convenience.
Burley Handlebar Console
$59.99
Stay organized while you’re on the go with the Burley Handlebar Console. The perfect compartmentalized space while jogging or strolling keeps everything you need within reach. Includes space for water bottle or coffee, wallet, keys, & cell phones—or for any need that arises. - Two cup holders - Large center compartment - Interior mesh zip pocket for smaller items - Clear top pocket for easy hands-free viewing - Quiet magnetic lid closure - Attaches using Velcro straps
Surly Trailer Axle Nuts
$35.00
Surly Trailer Parts - These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts - They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts
Adams 15mm-12mm Stepdown Block
$14.99
• Used to retrofit new style hitch to older 12mm style • Must be combined with 1st knuckle from 15mm horizontal hitch
Adams Standard Block and Bolts
$16.99
• Used on steel models post 1998 • Comes with new style bolts and washers
Thule Axle Mount ezHitch
$49.95
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
Burley Premium Seat Pads
$49.99
The Premium Seat Pad provides cushioning with an adjustable headrest to keep your little one comfortable and supported. The hand-washable padding is easily removed for cleaning. - Seat and shoulder strap padding - Headrest for added support - Removable and hand-washable - Includes: Seat Padding, Shoulder Strap Padding, & Headrest - Compatible with 2016-Current child trailers
Burley 2-Wheel Stroller Kit
$99.99
Take your Burley all over town with the 2-Wheel Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. Leveling springs keep the stroller grounded on uneven terrain. Get out and explore with added versatility. - Easy conversion from biking to strolling - Fully pivoting wheels provide optimal maneuverability - Wheels easily slide into the trailer mounts - Includes: 8-inch Stroller Wheels (2) & Wrist Tether - Compatible with: 2019 – D’Lite X, 2019 – D’Lite Single, 2019 – Cub X, 2019 – Encore X, 2007-Current – D’Lite, 2007-Current – Encore, 2007-2018 – Solo, & 2010-2018 – Cub
Burley Thru Axle Adapter
$54.99 - $79.99
Burley’s official adapter for bikes with a 12mm thru axle. Stock thru axles are not able to accommodate any sort of axle mounted hitch system. The Burley Thru Axle is a requirement for any axle mounted hitch system with a bike that has a 12mm thru axle. Burley's new Thru Axles have an external male threading on the end to accommodate the installation of our axle mounted hitch system.
Burley Travoy Shoulder Strap
$19.00
Burley's Travoy Shoulder Strap allows you to carry any Travoy bag. This fully adjustable strap includes a shoulder pad for comfort.
Burley Solstice Rolling Travel Case
$109.00
Take your Burley Solstice anywhere and keep it protected with this Rolling Travel Case. It stands upright and has multiple handles for easy carrying. -Includes wheel bags to protect the fabric of the stroller. -Stands upright when stroller is inside. -Handles on the top and side for multiple carrying options. -Rolls up for compact storage.
Surly Grub Screw for Hitch Mount Nut
$8.00
Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
Surly Trailer Skewer
$35.00
A skewer for your Surly Trailer.
Surly Dummy Hitch
$350.00
Some of you people just can't get enough hauling done with your Big Dummy or your Surly trailer. Well, nutball cargo haulers, here is your solution: The Big Dumb Trailer Hitch. This handy piece replaces the wheel yoke of your Surly Bill or Ted trailer and inserts into the horizontal tubes on the non-drive side of your Surly Big Dummy cargo bike, thereby making it possible to haul your trailer using your cargo bike. Wow. I'm not really sure what to say here. Good for you, I guess? I hope your hemorrhoid surgery goes really well. Note: Big Dummy Hitch is not compatible with the Big Fat Dummy
Surly Trailer Hitch/Yolk Assembly (trailer sold separately)
$300.00
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
Burley Tail Wagon Stroller Kit
$99.99
Take your furry friend all over town with the Tail Wagon Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. - Tool-free installation - Stroller wheels push easily - Compact footprint for maneuverability in tight spaces - Compatible with 2008 – current Tail Wagon models
Burley Universal Bag Clips (Travoy)
$19.99
Burley's Travoy Universal Bag Clips allow you to make your own bag attach securely to your Travoy trailer (sold separately).
Burley Hitch Alt Adapter (M10 x 1.0)
$17.99
Burley's Hitch Alt Adapters enable use of the standard Burley hitch on bicycles that have rear dropouts that don't allow normal installation of the hitch (the dropouts are the parts of the frame where the rear wheel is attached). This type of adapter is installed in place of the non-drive (left) side axle nut and once it's in place, the Burley hitch is installed to the adapter.
Burley Travoy Tie Down Straps
$19.99
Burley's Travoy Tie Down Straps help you secure your cargo to your Burley Travoy trailer (sold separately). These straps, sold in pairs, can replace the straps that come standard with the Travoy trailer or they can be used for added stability.
Burley Ballz QR Skewer, Long
$29.99
Enables connection of the Coho XC trailer to bikes with QR skewers. These QR skewers replace the existing QR skewer on your bike to enable compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with QR skewers. The standard version of this skewer is included with the Coho XC out of the box. - Easily replace your rear QR skewer to attach the Coho XC - Quick and easy installation - Specially designed for use with the Coho XC
Burley Wall Mount For Trailercycles & Travoy
$25.00
Burley's Wall Mount makes it easy to hang and store your Trailercycle or Travoy out of the way in the garage or house. Simply screw the mount into a wall and you can easily hang your Burley Piccolo or Kazoo Trailercycle or Travoy trailer in style (sold separately).
Bar Mitts Baby Stroller/Jogger Pogies
$54.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
Page 1 of 2 Next page